What Size Australian Flag Should I Buy?
Explore products and signage solutions featured in this guide:
Choosing the right size Australian flag is easier when you start with one question: where will the flag be displayed?
For indoor displays, the pole height usually determines the most suitable flag size. For outdoor flagpoles, the flag should look balanced against the pole height without placing unnecessary strain on the fabric, stitching or hardware.
Use this guide to quickly match your Australian flag size to your indoor pole, outdoor flagpole or display location. You can shop standard sizes in our Australian Flags range, with larger custom sizes available by quote.
Choose Your Australian Flag Size in 4 Steps
Start with the display location
Is the flag going indoors, outdoors, on a wall, on a floor stand or on a permanent flagpole? This will help determine the most suitable size and finish.
Match the flag to your pole height
For indoor presentation displays, use the pole size recommendations below. For outdoor flagpoles, use the pole height table further down the guide.
1.2m indoor pole → 900 × 450 mm
1.8m indoor pole → 1370 × 685 mm
2.4m indoor pole → 1800 × 900 mm
Note: The 900 × 450 mm flag is generally suited to an approximately 1.2m indoor pole. Our most commonly ordered presentation displays use 1370 × 685 mm flags with 1.8m poles and 1800 × 900 mm flags with 2.4m poles.
Think about wind and exposure
If the flag will be flown in an exposed, coastal or high-wind area, a slightly smaller flag can help reduce strain on the fabric, stitching and hardware.
Choose the right finish
Choose Header with Loops for traditional outdoor flagpoles. Choose a Vertical Sleeve for indoor presentation poles.
Our standard vertical sleeve is designed to suit poles up to 28mm in diameter. Sleeves can also be made to suit poles up to 32mm in diameter. If your pole is thicker than our standard size, please contact us or add a note to your order so we can adjust the sleeve to suit.
Most Common Flag Size Choices
1.8m Pole
1370 × 685 mm
A popular size for indoor presentation displays, schools, offices, foyers and formal settings.
2.4m Pole
1800 × 900 mm
Ideal for larger formal displays, ceremonies, council chambers and three-flag presentation sets.
6m Pole
1800 × 900 mm
The most common outdoor size for schools, businesses and community sites.
9m Pole
2750 × 1380 mm
Best for larger commercial sites, councils and high-visibility public displays.
Standard Australian Flag Sizes Available Online
These are the standard Australian flag sizes available online from Evan Evans. Larger sizes can be quoted for high poles, public sites and special installations.
Flag Size by Pole Height
Use this table once you know your indoor or outdoor pole height. The yard guide is approximate; the metric sizes shown are the closest standard sizes available online.
| Pole / Display Type | Approx. Yard Guide | Recommended Flag Size | Best For | Finish |
|---|---|---|---|---|
| Approx. 1.2m indoor pole | 1 yd approx. | 900 × 450 mm | Small indoor displays and compact presentation areas | Vertical Sleeve |
| 1.8m indoor pole | 1.5 yd approx. | 1370 × 685 mm | Schools, offices, foyers and presentation displays | Vertical Sleeve |
| 2.4m indoor pole | 2 yd approx. | 1800 × 900 mm | Formal indoor displays and three-flag presentation sets | Vertical Sleeve |
| Up to 3m outdoor pole | 1 yd approx. | 900 × 450 mm | Small residential or compact outdoor displays | Header with Loops |
| 4.5m outdoor pole | 1.5 yd approx. | 1370 × 685 mm | Homes, clubs and smaller commercial sites | Header with Loops |
| 6m outdoor pole | 2 yd approx. | 1800 × 900 mm | Schools, businesses and community sites | Header with Loops |
| 7.5m outdoor pole | 2.5 yd approx. | 2300 × 1150 mm | Council buildings, civic sites and larger properties | Header with Loops |
| 9m outdoor pole | 3 yd approx. | 2750 × 1380 mm | Public spaces, larger commercial sites and high-visibility areas | Header with Loops |
| Large outdoor poles | 3.5 yd approx. | 3200 × 1600 mm | Large civic, school, corporate and event sites | Header with Loops |
| 12m outdoor pole | 4 yd approx. | 3600 × 1800 mm | Landmark sites, major public displays and large outdoor flagpoles | Header with Loops |
Choose Your Finish
Header with Loops
Features reinforced loops with sister clips for easy mounting to a flagpole halyard.
Best for: outdoor flagpoles, homes, schools, councils, clubs and commercial sites.
Vertical Sleeve
A tailored side pocket designed to slide over an indoor presentation pole.
Our standard vertical sleeve suits poles up to 28mm in diameter. We can also manufacture sleeves to suit poles up to 32mm in diameter.
If your pole is thicker than our standard size, please contact us or add a note to your order so the sleeve can be adjusted to suit.
Best for: indoor display poles, foyers, offices, council chambers, schools and formal presentation areas.
Need to Know Before Ordering
Most Common Size
1800 × 900 mm is the most common outdoor Australian flag size for a 6m pole.
Windy Locations
For exposed or coastal sites, consider a smaller size or a more durable material option.
Flag Care
Lower flags during severe weather, inspect stitching regularly and allow wet flags to dry before storage.
Council Approval
For new flagpole installations, especially commercial or public-facing sites, check local requirements first.
For more detail, read our guides on flag care and etiquette or flagpole permission in Australia.
Next Step: Choose Your Flag
Shop Australian Flags
Browse standard Australian flag sizes and finishes online.
Need a Stronger Outdoor Option?
For higher-wear outdoor use, consider a woven polyester option.
School or Council Display?
Explore broader signage support for schools, councils and public facilities.
Need Help Choosing the Right Australian Flag Size?
Shop standard Australian flag sizes online, or contact Evan Evans if you need help with custom sizing, indoor presentation displays, outdoor flagpole requirements or a larger public-site installation.
Request a Quote, browse our Australian Flags, or explore selected custom options in our Design Online range.
Australian Flag Size FAQs
What is the most common Australian flag size?
The most common outdoor Australian flag size is 1800 × 900 mm, especially for 6m flagpoles used by schools, community organisations and commercial sites.
What size Australian flag do I need for a 6m pole?
For a 6m outdoor pole, 1800 × 900 mm is usually the best standard size. It offers strong visibility while keeping the flag proportionate to the pole.
What size Australian flag suits a 1.2m indoor pole?
A 900 × 450 mm Australian flag is generally suited to an approximately 1.2m indoor presentation pole. This is a less commonly ordered presentation size than our 1.8m and 2.4m pole combinations.
What size Australian flag do I need for a 1.8m indoor pole?
A 1370 × 685 mm Australian flag is the recommended size for a 1.8m indoor presentation pole.
What size Australian flag do I need for a 2.4m indoor pole?
An 1800 × 900 mm Australian flag is recommended for a 2.4m indoor presentation pole, especially for formal display settings and three-flag presentation sets.
What size Australian flag do I need for a 9m pole?
For a 9m outdoor flagpole, 2750 × 1380 mm is a suitable standard online size. For exposed or high-wind sites, consider the conditions before choosing the final size.
What diameter pole will a vertical sleeve fit?
Our standard vertical sleeve is designed for poles up to 28mm in diameter. We can also manufacture sleeves for poles up to 32mm in diameter. If you have a thicker or non-standard pole, contact us or add a note to your order with the pole diameter.
Should I choose a smaller flag for windy areas?
In exposed, coastal or high-wind areas, a slightly smaller flag can help reduce strain on the fabric, stitching and flagpole hardware. A more durable option such as a Woven Polyester Australia Flag may also be worth considering.
